Anyone wanna buy an old car in South Carolina? :]
-----------------------------------
ASKING $15k OBO. Also willing to consider trades of 2003+ sportbikes + cash
1979 Corvette
Engine
-Professionally built 383, combo is supposed to put ~450hp to the crank
-Rebuilt at 115,030 miles (127k now)
-Eagle 4340 forged 3.75 stroke crank
-Block decked & bored .030
-Engine fully balanced
-Eagle 57 H-beam rods
-King racing bearings
-ARP bolts
-Keith Black flat top 10.5 pistons
-Plasma moly rings
-Comp High Energy Cam Lift: 480 / .490, Dur: 230 / 236, Sep: 110
-Comp anti pump up lifters
-Comp Cams premium .080 push rods
-Harlam Sharp roller rockers 1.5
-Trick Flow 23º aluminum heads
-Edelbrock 1903 795cfm carburetor
-Edelbrock Performer intake
-Roll Master timing chain set
-Dynagear high volume oil pump
-High flow aluminum water pump
-New fuel pump
-Summit HEI distributor
-Mallory Hy-Fire IV ignition
-SFI approved flex plate
-Oversized alternator pulley
-High performance fan
-Line lock
-3" dual exhaust
-Hooker 1-3/4" ceramic coated headers
-Flowmaster mufflers
Transmission
-700R4 fully rebuilt to racing specs (less than 5000 miles on rebuild)
-Billet servo
-Raybestos Z-Pak clutch set
-New linkage and indicator set
-New sunshell
-Hi-performance 2800 L/U torque converter
Chassis / Drive Train
-Drive shaft mod. & balance by Crane Co.
-All new universal joints
-New rear end seal set
-3.55:1 ratio LS differential
-New rear spring & struts
-Front end rebuilt 5k miles ago
Body / Interior
-2-1/4" rise hood
-Flex fiberglass bumper
-Carpet & mats replaced 3 years ago
-Door & t-top seals replaced 3 years ago
-New dashboard
-New console
-Tinted windows
-MP3 CD Player
-Polk speakers
-----------------------------------
ASKING $15k OBO. Also willing to consider trades of 2003+ sportbikes + cash
1979 Corvette
Engine
-Professionally built 383, combo is supposed to put ~450hp to the crank
-Rebuilt at 115,030 miles (127k now)
-Eagle 4340 forged 3.75 stroke crank
-Block decked & bored .030
-Engine fully balanced
-Eagle 57 H-beam rods
-King racing bearings
-ARP bolts
-Keith Black flat top 10.5 pistons
-Plasma moly rings
-Comp High Energy Cam Lift: 480 / .490, Dur: 230 / 236, Sep: 110
-Comp anti pump up lifters
-Comp Cams premium .080 push rods
-Harlam Sharp roller rockers 1.5
-Trick Flow 23º aluminum heads
-Edelbrock 1903 795cfm carburetor
-Edelbrock Performer intake
-Roll Master timing chain set
-Dynagear high volume oil pump
-High flow aluminum water pump
-New fuel pump
-Summit HEI distributor
-Mallory Hy-Fire IV ignition
-SFI approved flex plate
-Oversized alternator pulley
-High performance fan
-Line lock
-3" dual exhaust
-Hooker 1-3/4" ceramic coated headers
-Flowmaster mufflers
Transmission
-700R4 fully rebuilt to racing specs (less than 5000 miles on rebuild)
-Billet servo
-Raybestos Z-Pak clutch set
-New linkage and indicator set
-New sunshell
-Hi-performance 2800 L/U torque converter
Chassis / Drive Train
-Drive shaft mod. & balance by Crane Co.
-All new universal joints
-New rear end seal set
-3.55:1 ratio LS differential
-New rear spring & struts
-Front end rebuilt 5k miles ago
Body / Interior
-2-1/4" rise hood
-Flex fiberglass bumper
-Carpet & mats replaced 3 years ago
-Door & t-top seals replaced 3 years ago
-New dashboard
-New console
-Tinted windows
-MP3 CD Player
-Polk speakers
Last edited: