Upgraded But It Aint Werkin Right :[
- Thread starter fibulator
- Start date
fibulator said:two problems
1)
i replaced my mobo, cpu sempron 2300 and ram 256mb ddr2700.
but my hd's partitions (winxp + 98) dont get recognized.
the bios recognizes the HD but it doesnt get read during the boot process.
i was able to access the recovery thingy and formated both partitions. but it didnt help. i guess i need a new hd
2) i upgraded because either my mobo or cpu died and i would get a black screen when i booted.
however now i seem to be having the same problem again after booting about 100 times unsuccessfully. i gbuess ill try removing my praphics card which might be broke.
any advice is appreciated! ~~~~thanks :O xoxxoxoxoXOXOXOXOX <3<3<3<3<3<3
1) Replace the interface cables for the disks.
2) What motherboard? You may need a bios update--I did for my 9600xt on a kt600 chipset board. Or, you may have a bad power supply (state the brand and capacity please), or a bad video card. You may also have bad RAM.