many other ppl too pimp, carnova, etc etc etce tc (dont take it personally if ur name not in the title plz) and check for new interpolate links
tips- 400 dpi capable mouse with minimal firmware smoothing works best most likely (read most guide list or image below far below)
- 6 clicks in windows always, no enhance mouse pointer precision/accuracy (or mouse firmware is gonna malfunction)
- find and use netset aka interpolatetime and predictforward time Easy One Click Install Here
- in game sensitivity should be very low (below .000450, all the way down to .000110 or lower 000167 is a good starting point imo)
- 180 or 360 should be about 15-20 cm+ all the way to a couple of feet
- tweek in game config settings for least lag with info in this thread Tribes Install Thread and Troubleshooting and INTERPOLATE by pancake - TribalWar Forums
configs
Rtcll's Config and mouse sensitivity and interpolate settings
https://mega.nz/#!CxMCjCoR!S8Yio6wmV...3Yro14BpPGGvd8
Snow's Mouse sensitivity
Code:
EditActionMap("playMap.sae");
bindAction(mouse0, xaxis0, TO, IDACTION_YAW, Flip, Scale, 0.000167);
bindAction(mouse0, yaxis0, TO, IDACTION_PITCH, Flip, Scale, 0.000167);
bindCommand(keyboard0, make, "q", TO, "nextWeapon();");
bindCommand(keyboard0, make, "r", TO, "prevWeapon();");
$net::predictforwardtimemethod=1;
$net::interpolatetime=0;
$net::predictforwardtime=32;
NetSet Variables
Code:
NetSet Variables:
$net::interpolateTime,
$net::predictForwardTime, and $net::predictForwardTimeM ethod.
Both Interpolate and PFT use their default values unless set otherwise.
Example:
$net::interpolateTime = 64; // Default 1.11, 1.30 and 1.40
$net::predictForwardTimeM ethod = 0; // Default 1.40 PFT
implementation. Using this method, the PFT setting does nothing.
$net::predictForwardTimeM ethod = 1; // PFT setting is used now, rather
than the 1.40 implementation.
$net::predictForwardTimeM ethod = 2; // PFT is set similar to 1.40's
algo, but in increments of 32. An experimental setting meant to reduce
jitter.
Past mouse config super threads and resources:
A good video explaining how to config your higher sensitivity mouse for more precision (I don't do this personally but the guy narrating the video is pro in quake 3 and reflex and amazing).
http://www.youtube.com/watch?v=KORL144_co8
Large Mousing Space makes Aim Easier