[LTB] Cisco devices (routers/switches)

Hello :wave: I am trying to put together a CCNP lab while i study for the CCNP thus I am going to need a few routers/switches. If you have a router/switch you are looking to get rid of please PM me or respond in this thread. PLEASE PLEASE PLEASE turn on the router/switch do a "sh ver" and copy/paste the output into the thread or the pm. I am looking to make sure the devices can run IOS 12.4 or have the ability to be upgraded with memory to run 12.4.


Thanks :heart:

packet tracer

google it

Have a Cisco 1720 here. It's old, has a T1 module in it though.

Don't know if it's upgradable to 12.4. Here is the output requested:
Router>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1(8c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 08-Feb-02 17:57 by shawnk
Image text-base: 0x80008088, data-base: 0x805ED0F8

ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System returned to ROM by reload
System image file is "flash:c1700-y-mz.121-8c.bin"

cisco 1720 (MPC860) processor (revision 0x601) with 24576K/8192K bytes of memory.
Processor board ID JAD061807B9 (1068773436), with hardware revision 0000
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

You can have it for $20 + shipping.

I'll throw in a console cable too.

Edit: Looks like you need 16mb flash & 48 mb main memory to run 12.4, so you'd need to upgrade both.

packet tracer

google it

ive had it for a while, PT does not do any of the advanced shit that the CCNP calls for and dynamips,gns3 are very unstable in larger networks for simulating BGP and other routing protocols.

Have a Cisco 1720 here. It's old, has a T1 module in it though.

Don't know if it's upgradable to 12.4. Here is the output requested:
Router>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.1(8c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 08-Feb-02 17:57 by shawnk
Image text-base: 0x80008088, data-base: 0x805ED0F8

ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System returned to ROM by reload
System image file is "flash:c1700-y-mz.121-8c.bin"

cisco 1720 (MPC860) processor (revision 0x601) with 24576K/8192K bytes of memory.
Processor board ID JAD061807B9 (1068773436), with hardware revision 0000
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

You can have it for $20 + shipping.

I'll throw in a console cable too.

Edit: Looks like you need 16mb flash & 48 mb main memory to run 12.4, so you'd need to upgrade both.

lemme see what the latest IOS i can throw into this and ill PM you, thx for the reply :D

wat

.

wat

packet tracer does not work for CCNP/CCIE level, that is what i am trying to say. If you are studying for the CCNP/CCIE and need help PM me and i can set you up with GNS3 configs so you can run all the CCNP/CCIE labs with real cisco IOS's.