[Mapping] A few questions :(

First off, I loaded up TVed and played around a bit, and its hard to get used to :P

However, I loaded up a prefab terrain, and then randomly pained some hills and the likes, I finally got it to load, and I'm actually standing on the terrain :lol:

Now for the problems:

#1

When I look outside of the OOB grid, there is no terrain there sometimes, it doesn't render the terrain until you are right near it, or looking directly at it.

http://www..com/upload/mapping.jpg

Does this have something to do with visibility settings? Halp!

#2

Whenever I use the smooth command along ONE of the oob grid walls, it shoots up spikes along the wall, instead of smoothing it.

http://www..com/upload/mapping1.jpg

Any help is appreciated~!

you'll have better luck in this forum:
http://www.tribalwar.com/forums/forumdisplay.php?f=3

Probably not actually :shrug:

You should never smooth on edges of the terrain.

On the top view right click on the toolbar (grey area) and select view terrain. See if the terrain goes beyond the OOB grid.

Kinda like the spikes.... make em bigger. :clap: