FS: Lian Li PC-6070B, IBM Aptiva box (RTR), Voodoo 3 2000 PCI

First off this will take multiple post (I guess Uritel didnt see this?!!?), because I believe in pics when selling.

First up is a Lian Li 6070B (silent) case. You can read a review of it here. (http://www.cluboverclocker.com/reviews/cases/lian_li/pc-6070b)

I have modded this case, to make for better air flow, and to be more quiet. Also to fit on my Mach II. I cut a half circle for the hose to fit.

http://home.comcast.net/~kellyfall/Lian/1.JPG

Hole I was talking about.

http://home.comcast.net/~kellyfall/Lian/2.JPG

Hd casge "mod". You can undo this if you dont like it, by removing two screws and the tape. Or I can do it for you. You can see it installed here (http://mywebpages.comcast.net/dfall/Comp/Prommy/16.JPG), and here. (http://mywebpages.comcast.net/dfall/Comp/Prommy/16.JPG)

http://home.comcast.net/~kellyfall/Lian/3.JPG
http://home.comcast.net/~kellyfall/Lian/5.JPG

Wiring if the fan controller.

http://home.comcast.net/~kellyfall/Lian/6.JPG

Cut the rear fan guard out to improve air flow, and to be more quiet.

http://home.comcast.net/~kellyfall/Lian/7.JPG

The front fan guard I took off to do the same. You can put it back on if wanted.

http://home.comcast.net/~kellyfall/Lian/9.JPG

Bottom view of the hole. It wouldnt be very hard, to cut a piece of metal or whatever to fit there, and then put some more black mat over the top. Tap out a hole for the leg, and you wouldnt be able to tell. Or just leave it as is, and rest the case on top of it. It still holds it up just fine.

http://home.comcast.net/~kellyfall/Lian/11.JPG

As you can see, it holds it up, and you cant even see it.

http://home.comcast.net/~kellyfall/Lian/10.JPG

I cut the front out a little, to give more air flow.

http://home.comcast.net/~kellyfall/Lian/12.JPG

Still have the original box, so shipping the case wont be a problem.

http://home.comcast.net/~kellyfall/Lian/13.JPG

Fan controller installed.

http://home.comcast.net/~kellyfall/Lian/14.JPG

Wires hidden behind, I dont like wires showing. :)

http://home.comcast.net/~kellyfall/Lian/15.JPG

Back pic of case. :shrug:

Next up, a IBM Aptiva PC.

Specs:
AMD K6-2 333Mhz
64megs of ram
6gig Quantum Fireball EX6
Rape Pro Turbo AGP 2x
LT Winmodem (What DM says)
Crystal Audio (what DM says)
14-32x CD-ROM (what it says on top of it)

http://home.comcast.net/~kellyfall/IBM/1.JPG

http://home.comcast.net/~kellyfall/IBM/2.JPG

http://home.comcast.net/~kellyfall/IBM/3.JPG

http://home.comcast.net/~kellyfall/IBM/4.JPG

http://home.comcast.net/~kellyfall/IBM/6.JPG

http://home.comcast.net/~kellyfall/IBM/7.JPG

http://home.comcast.net/~kellyfall/IBM/8.JPG

As you can see, still have the manual, restore CD and all the paperwork.

Funnily enough, you did everything except put how much you want for it.

http://home.comcast.net/~kellyfall/3DFX/1.JPG

http://home.comcast.net/~kellyfall/3DFX/2.JPG

Bare card, with install CD.


(more pics next post, gimme a few)

Funnily enough, you did everything except put how much you want for it.

Now that I had to rewrite the first post because Uritel didnt read and I edited the wrong post..

I am wanting $80 shipped for the case. Its about $150-$170 online, without shipping I think. I know it has a hole in the bottom.. but I still think its a good deal. The hole can be taken care of easily, or ignored and still not seen. Also it has the fan controller, that is about $20 I think.

The IBM system, I want also $80 shipped for it. I know its slow... but its in great shape. Kept clean, in a non-smokers house. :) As you can see, still have the manual and cd's. Would be good for a basic PC, or very limited gaming. Or even a Linux firewall. Its VERY quiet, with just two fans in it. The PSU and CPU fan. Both are virtually silent. The loudest thing in it is the HD, but its not bad at all.

$20 shipped for the card. Old, but this is a Tribes forum.. and its a great Tribes card. :) It was actually in the old IBM case, and played Tribes at a decent frame rate (30's usually).

Perfect 23-0 heatware under fallguy (http://www.heatware.com/eval.php?id=10954) Traded my 3.0c on here a few days ago, a few posts down. Ask him how it went. :) PM or email me at denverfall@comcast.net with any questions.

I read it and saw that there was going to be multiple posts.. but had figured you would include the pricing at the top of each post for what you were advertising.

I thought it would be easier to do it at the bottom.. so I and others wouldnt have to scroll up to other posts, to talk about each product. :shrug: I suck at formatting and it probably could have been done a better way.

Price drop on the Lian Li case, and IBM setup. $80 shipped for both.. thats a steal I think.

The Lian Li has been sold!

Other two items are still available.

I'll take the Voodoo, send me PayPal info.

heh mind if i be nosey.

What new setup are you going to Emilee? Are you ditching the phase change?

heh mind if i be nosey.

What new setup are you going to Emilee? Are you ditching the phase change?
Save it for PMs or TW Tech.

As much as I'd like to hear about his newest system, we don't need to derail the thread for it.

I'll take the Voodoo, send me PayPal info.

PM sent with info.

spad, you have a PM.

Funds sent, please acknowledge.

Sorry data. will do